With the launch of the DALI OBERON loudspeaker series, we have picked the best elements from our current speakers and brought them together in a series that delivers on audio quality, looks and versatility.
This large floor-standing OBERON 7 speaker features 2 x 7” wood fibre SMC based woofers and an oversized 29 mm ultra-lightweight soft dome tweeter.
This, combined with the large but elegant cabinet, delivers the very best in deep bass and large room performance. Despite its size, this speaker is surprisingly delicate and will impress with its ability to render any music style naturally and lifelike even at lower volumes. This makes the OBERON 7 perfect for almost any audio setup and any music or movie style.
With the OBERON 7, we have made it easy to integrate your loudspeakers into any room. Both the driver materials and geometry applied in the OBERON 7 has been selected to achieve a wide dispersion pattern in the listening area. The same principles have been applied in the design of the crossover.
As result, you will experience a well-integrated sound, even when listening at a significant off-axis angle. This is important as you are rarely seated directly in front of your loudspeakers when listening to music. An added benefit is seriously reduced harmonic distortion and diffractions causing frequency distortion, as these will always be stronger in an on-axis response. This is also the reason why all DALI speakers are not designed to be toed-in.
The OBERON 7 features a pair of 7" low-loss woofers that are optimised with a new wood fibre structured cone which is dedicated to reproduce the delicate midrange and bass frequency area - like every other driver made by DALI. It is constructed from a blend of fine grain paper pulp and reinforced with wood fibres, which creates a stiff, light-weight and well-behaving structure. In combination with a low-loss surround and spider suspension, this cone reproduces the micro details in the signal - unfiltered and with high accuracy.
For the OBERON 7 and OBERON 3, we chose a 7" driver with a membrane that has a 15% larger dimension than the common 6½ market standard. The larger cone area allows a lower voice coil excursion at the same sound pressure level compared to a 6½ woofer. It also allows a higher maximum sound pressure level, which leads to an effortless reproduction of the dynamics in the music.
The membrane terminates in a rubber surround that is chosen for its soft and very flexible properties. This gives the membrane free movement with a very low dampening effect, and leaves the magnet motor to control the membrane movement.
The use of SMC in the OBERON 7 greatly reduces mechanical distortion caused by hysteresis and eddy currents. These combined improvements in the magnet motor system results in a lowering of third order distortion. This allows the OBERON 7 to present longer listening pleasure, a relaxed midrange and a surprising amount of detailing for the class.
The magnet motor itself consists of a large ferrite magnet that sorrounds a pole piece made with a unique combination of iron and SMC. The iron ferrrite forms the lower base of the pole cylinder, topped of with 10 mm SMC disk to crown the pole piece. This combination minimizes the negative effects of the iron, while placing the SMC disk right in the main working area of the 4-layer voice coil. This placement ensures the maximum effect from the SMC on the voice coils environment, resulting in a greatly improved constant flux field.
The brand new 29 mm ultra-light soft dome tweeter used in the OBERON 7 is manufactured by DALI and has been developed specifically for the OBERON series - combining well proven technologies from our existing DALI ranges with new features.
The oversized 29 mm membrane is constructed based on an ultra-light wave weave fabric and is additionally optimised for a larger bandwidth in its lower frequency area. This ensures the optimal handover from the midrange woofer to the tweeter, creating a well-balanced, unforced and very coherent upper midrange. Compared to most soft dome tweeters in the market, the DALI dome material is less than half the weight (0.060 mg/mm2).
The large size of the membrane lets the tweeter generate higher sound pressure with less excursion, keeping the voice coil motion to a precise minimum.
The tweeter front plate near the dome has been designed with similar geometry as the OPTICON and RUBICON tweeters to create the optimal working conditions for the soft dome. The aim is to combine an extended frequency response with wide dispersion and low coloration.
The cabinet housing of the OBERON 7 is constructed from high-density CNC machined MDF board - dressed in carefully selected high-grade vinyl. The OBERON 7 cabinet employs a very rigid construction, with solid bracings across the inside of the cabinet for reinforcement. This contributes to the stiffness and practically eliminates resonance within the cabinet.
To optimise timing, the speakers are fitted with acoustic damping material internally along the sides, top and bottom. This creates a more direct contact between woofer and bass port. The audible result is a more precise bass and increased ‘attack’ in the midrange.
The bass ports are placed on the rear of the OBERON 7, optimising room integration by utilising the wall for improved bass performance.
With the OBERON range, DALI introduces a brand new front grille design. The new rounded front grille adds a lighter and more contemporary visual look to the speaker series. 'Mountain Grey' is the standard grille supplied with the light finishes (White and Light Oak), while 'Shadow Black' is standard on the dark finishes (Black Ash and Dark Walnut). For an all white look, 'Marshmallow White' is also available as an accessory.
The elegantly shaped aluminium base gives the floor-standing OBERON 7 a lighter look.
Frequency Range (+/-3 dB) [Hz] 36 - 26,000
Sensitivity (2,83 V/1 m) [dB] 88.5
Nominal Impedance [ohms] 6
Maximum SPL [dB] 110
Recommended Amplifier Power [W] 30 - 180
Crossover Frequency [Hz] 2,300
Crossover Principle 2-way
High frequency driver, Quantity 1 x 29 mm
High frequency driver, Diaphragm type Soft Textile Dome
Low frequency driver, Quantity 2 X 7
Low frequency driver, Diaphragm type Wood Fibre Cone
Enclosure type Bass Reflex
Bass Reflex Tuning Frequency [Hz] 39.5
Connection Input Single Wire
Recommended Placement Floor
Recommended Distance From Wall [cm] 20 - 80
Dimensions With Base (HxWxD) [mm] 1015 x 200 x 340
Weight [kg] 14.8
Accessories Included Manual, Rubber Feet, Spikes, Front Grille
Modalitati si termeni de livrare:
Comanda va ajunge în 24 de ore prin Fan Courier.
Transportul este gratuit pentru:
Taxa de curierat pentru comenzi cu valoare mai mică de 500 de lei în restul țării este de 20 de lei.
Puteți ridica comanda din sediul Stereomag din str. Vasile Alecsandri nr. 14, sector 1, București, doar cu confirmarea reprezentantului companiei că produsele se află în stoc.
Daca vrei să afli stadiul comenzii tale, intră în Contul meu (link) sau ia legătura cu un reprezentant Stereomag la numărul de call-center: 0744 357 664 (Luni-Vineri: 9.00-20.00) sau pe adresa de email: firstname.lastname@example.org.
Daca ai probleme suna la 0744.357.664 sau scrie-ne la email@example.com, in primele 15 zile de la primirea coletului.
Regasiti mai jos principalele aspecte legate de dreptul dvs. de returnare. Pentru informatii suplimentare puteti consulta Termeni si conditii - sectiunea Dreptul de returnare a produselor, .
Returnarea produselor achizitionate prin incheierea unui contract la distanta se va face conform Ordonantei Guvernului nr. 34 din 12 iunie 2014 care stipuleaza:
Consumatorul are dreptul sa notifice in scris comerciantului ca renunta la cumparare, fara penalitati si fara invocarea unui motiv, in termen de 14 zile calendaristica de la primirea produsului sau, in cazul prestarilor de servicii, de la incheierea contractului.
Consumatorul are dreptul de a denunta unilateral contractul la distanta, in termen de 14 zile calendaristice, fara penalitati si fara invocarea vreunui motiv. Singurele costuri care pot cadea in sarcina consumatorului sunt cheltuielile directe de returnare a produselor. Termenul de 14 zile calendaristice, prevazut pentru exercitarea acestui drept incepe sa curga, pentru produse, de la data primirii lor de catre consumator. Rambursarea sumelor se va face in cel mult 14 de zile calendaristice de la data denuntarii contractului de catre consumator.
Consumatorul nu poate denunta unilateral urmatoarele tipuri de contracte, cu exceptia cazurilor in care partile au convenit altfel:
a) contracte de furnizare de servicii a caror executie a inceput, cu acordul consumatorului, inaintea expirarii termenului de 14 zile calendaristice;
b) contracte de furnizare de produse sau servicii al caror pret depinde de fluctuatiile cursurilor pietei financiare care nu pot fi controlate de comerciant;
c) contracte de furnizare a unor produse executate dupa specificatiile consumatorului sau a unor produse distinct personalizate, precum si a acelora care, prin natura lor, nu pot fi returnate sau care se pot degrada ori deteriora rapid;
d) contracte de furnizare a inregistrarilor audio, video sau a programelor informatice, in cazul in care au fost desigilate de catre consumator;
e) contracte de furnizare a ziarelor, periodicelor, jurnalelor-magazin;
f) contracte de servicii de pariuri sau loterii.
Produsele trebuie returnate in starea in care au fost primite, de preferinta in ambalajul original si insotite de toate accesoriile si documentele originale. In cazul manipularii defectuoase a produselor se va proceda la evaluarea starii acestora si determinarea valorii cu care se va diminua valoarea produselor returnate, conform OUG 34/2014, Art. 14, alin. (3)..
Pentru a va exercita dreptul de retragere trebuie sa ne informati cu privire la decizia dumneavoastra de a va retrage din prezentul contract, utilizand o declaratie neechivoca, de exemplu, o scrisoare trimisa prin posta, fax, e-mail sau SMS.
De asemenea, puteti completa si transmite electronic modelul de FORMULAR DE RETUR, insa folosirea acestuia nu este obligatorie.